S&C Workshops

Back to Top

Make sure you are realizing the benefits of all features and functions of your distribution automation system. Improve the efficiency of initial configuration and ongoing operations by attending an in-depth, hands-on product training session. Custom on-site workshops are available, or enroll in one of the following public workshops.



Circuit-Switcher Workshop | May 20 to 21, 2020 | Ontario, Canada

Distribution Automation Workshop: SpeedNet™ Radio | June 2 to 3, 2020 | Chicago

Distribution Automation Workshop: IntelliRupter® PulseCloser® Fault Interrupter | September 8 to 10, 2020 | Chicago

Circuit-Switcher Workshop | September 9 to 10, 2020 | Ontario, Canada

Distribution Automation Workshop: Advanced IntelliRupter® PulseCloser® Fault Interrupter | September 10 to 11, 2020 | Chicago

 

 



Circuit-Switcher Workshop

May 20 to 21, 2020 | Ontario, Canada

S&C’s two-day-long Circuit-Switcher Workshop will provide attendees with valuable, in-depth information and a unique hands-on experience in the installation, operation, adjustment, and maintenance of the following S&C Circuit-Switchers:

  • Type G through Mark V Circuit-Switchers
  • Series 2000 Circuit-Switchers


The workshop’s primary emphasis is on Circuit-Switchers rated 34.5 kV through 230 kV. This course will be delivered by S&C Electric Canada Ltd. at the Hydro One Stations Training facility located in Orangeville, Ontario.

Participants are required to bring the following safety equipment: dielectric footwear, safety glasses, a hard hat, hearing protection, and fire-resistant clothing.

The Circuit-Switcher Workshop will be held from 8 a.m. to 4 p.m. on each day at the Orangeville Stations Training facility, 125 C Line, Orangeville, Ontario, Canada, L9W 3V2.

The registration fee for this workshop is C$3,000 per attendee. Participation is limited to 12 attendees for this workshop.


Register Now

Back to top

 

 



Distribution Automation Workshop: SpeedNet™ Radio

June 2 to 3, 2020 | Chicago

This S&C two-day workshop will have you review radio-communication fundamentals and networking basics and solidify this knowledge through hands-on exercises. Discuss the benefits of mesh radio networks. Learn SpeedNet Radio specifications, configuration options, and security features. Set up a two-node radio system by connecting to and configuring SpeedNet Radios using the SpeedNet Radio Client Tool. Upgrade the SpeedNet Radio firmware and perform a factory reset. Learn SpeedNet Radio system-performance optimization best practices and troubleshooting steps.

The SpeedNet Radio Workshop will be held from 9:00 a.m. to 4:00 p.m. on June 2 and 3 at S&C Electric Company’s headquarters, 6601 North Ridge Boulevard, Chicago, Illinois, 60626.

The registration fee for this workshop is $1,295 per attendee. Participation is limited to 12 attendees.


Register Now

Back to top

 

 



Distribution Automation Workshop: IntelliRupter® PulseCloser® Fault Interrupter

September 8 to 10, 2020 | Chicago

Learn how to connect to an IntelliRupter® fault interrupter and configure settings through valuable hands-on programming and exercises. Topics include PulseClosing® Technology; the PulseFinding™ Fault Location Technique; protection settings, including bi-directional overcurrent protection; communication settings; and more. Become versed in the hardware features and practice operating IntelliRupter fault interrupters manually and via IntelliLink® Setup Software. Upgrade the firmware on a control module. Perform troubleshooting by reviewing diagnostics, status logs, and event logs from live events performed in S&C’s Product Demonstration Center.

Attendees wanting to learn about advanced features of this product should consider attending the one-day IntelliRupter PulseCloser Fault Interrupter Advanced Workshop offered immediately following this course. Individuals interested in detailed training for specific applications should contact S&C to discuss custom training programs.

The basic IntelliRupter fault interrupter workshop will be held from 8:30 a.m. to 4:30 p.m. on September 8 and 9, 2020, and from 8:30 a.m. to 2:00 p.m. on September 10, 2020, at S&C Electric Company’s headquarters, 6601 North Ridge Boulevard, Chicago, Illinois, 60626.

The registration fee for this workshop is $1,295 per attendee. Participation is limited to 12 attendees.


Register Now

Back to top

 

 



Circuit-Switcher Workshop

September 9 to 10, 2020 | Ontario, Canada

S&C’s two-day-long Circuit-Switcher Workshop will provide attendees with valuable, in-depth information and a unique hands-on experience in the installation, operation, adjustment, and maintenance of the following S&C Circuit-Switchers:

  • Type G through Mark V Circuit-Switchers
  • Series 2000 Circuit-Switchers


The workshop’s primary emphasis is on Circuit-Switchers rated 34.5 kV through 230 kV. This course will be delivered by S&C Electric Canada Ltd. at the Hydro One Stations Training facility located in Orangeville, Ontario.

Participants are required to bring the following safety equipment: dielectric footwear, safety glasses, a hard hat, hearing protection, and fire-resistant clothing.

The Circuit-Switcher Workshop will be held from 8 a.m. to 4 p.m. on each day at the Orangeville Stations Training facility, 125 C Line, Orangeville, Ontario, Canada, L9W 3V2.

The registration fee for this workshop is C$3,000 per attendee. Participation is limited to 12 attendees for this workshop.


Register Now

Back to top

 

 



Distribution Automation Workshop: Advanced IntelliRupter® PulseCloser® Fault Interrupter

September 10 to 11, 2020 | Chicago

Dive deeper into the advanced features of IntelliRupter® fault interrupters, such as communication-enhanced coordination and intelligent fuse savings. Configure a loop-restoration scheme between two IntelliRupter fault interrupters. Learn the procedures for downgrading firmware. Perform more in-depth event analysis by downloading waveforms and analyzing in WaveWin software.

S&C recommends participants attend the basic IntelliRupter fault interrupter workshop before taking this advanced course. The basic course is offered immediately before the advanced course.

The advanced IntelliRupter fault interrupter workshop will be held from 1 p.m. to 4:30 p.m. on September 10, 2020, and from 8:30 a.m. to noon on September 11, 2010 at S&C Electric Company’s headquarters, 6601 North Ridge Boulevard, Chicago, Illinois, 60626.

The registration fee for this workshop is $295 per attendee. Participation is limited to 12 attendees.


Register Now

Back to top